{category.name}

Product Catalog

 

  • All steel construction ensures long life
  • Powder coated finish
  • 56" length gives enough leverage for even the toughest jobs
  • Ideal for prying forms and other embedded objects


  • Drop Forged, Heat Treated Steel Head
  • Round, Polished Striking Surfaces
  • Rugged Contoured Hardwood Handle
  • Epoxy Bond Locks Head to Handle

Used for fast, easy alignment of clutch plates. Bushing range- import- 12 to 12.7 mm., 15.8 to 16 mm., 17.4 to 18 mm., 21 to 22.2 mm. Domestic- 0.561 in. to 0.590 in., 0.749 in. to 0.787 in. 0.812 in. to 0.874 in., 0.984 to 1.181 in. for use on most domestic and import cars.

Ratchet-style torque wrench has with engraved scale and a torque range of 10 - 150 ft.-lbs. in 1-lb. graduations.

Type: Steering Wheel Puller Set | For Use With: Steering Wheels that accept tapped cap screws

The Pitman arm puller fits most cars and light trucks. Constructed of drop-forged steel for strength and durability.

  • Adjustable to fit most Macpherson Strut sizes. Maximum height of removable spring: 9-1/2. Set of two compressors maintain spring curvature. Easy to install without special tools.

Safely and easily compresses coil springs accessible from the center of the coil. 12in. rod has tempered chrome molybdenum steel jaws. Jaw opening range is 8 1/4in.–14in.

Ball Joint Service Kit, Material Carbon Steel, Removes And Installs U joints And Press-Fit Ball Joints, For Use With Ratchet Or Breaker Bar, Includes G1319857 (C-Frame Press), 3 In O.D. x 2 3/4 In I.D. Receiver Tube, 2 1/2 In O.D. x 2 1/4 In I.D. Receiver Tube, 2 In O.D. x 1 3/4 In I.D. Receiver Tube, Installing Adapter and Removing Adapter

  • Used to remove shock linkage, tie rods, and ball joints. Also for general service on many cars and light trucks.
  • Size: 16" long, 15/16" Fork Spread

Rear Axle Puller, Slide Hammer, Length 23 In., Rear Axle Puller Fits Most Late Model Passenger Cars and Light Trucks for Removal of Flange Type Rear Axles, Puller Will Service Axles with Bolts and Studs Up to 9/16 In. Diameter, For Use With 4, 5, or 6 Bolts, Patterns and Stud Circles from 4-1/4 to 5-9/16 In. Dia., Material Carbon Steel, Number of Pieces 4, Includes Rear Axle Pulling Plate with 5-lb. Slide Hammer Assembly

This 1" pneumatic impact wrench, built with industrial-duty components, helps you power through major projects! Made with lightweight, durable cast aluminum housing, the air impact wrench has a convenient reverse valve for easy direction changes--three speeds forward and three speeds reverse. Featuring an 8" extended anvil and a torque range of 250-1250 ft. lbs., this tough pneumatic impact wrench works best with a 1/2" hose.
  • Lightweight, durable cast aluminum housing
  • Convenient reverse valve for easy direction changes

Bil-Jax Hoist Arm/Well Wheel

  • Swivel Head Hoist Arm: can be used in conjunction with Well Wheels
  • Makes Lifting Jobs Easier
  • Load Capacity: 100 lbs. using Well Wheel and Rope

General

Canopy 4 Post/Cabin
Bucket Capacity 3.9 cu. Ft.
Operating Weight 7,440 lbs
Transportation Weight 7,275 lbs

Engine

Model Yanmar 3 TNV84
Horsepower 26.5 @ 2,300 rpm
Fuel Tank Capacity 10.6 gals

Features

Travel Speed L/H 1.7/3.0 mph
Ground Pressure 4.6 psi
Swing Speed 8.8 rpm
Swing Angle L50°/R90°

General

 
Bucket Capacity 1.55 cubic ft
Operating Weight 3,850 lbs
Transportation Weight 3,600 lbs

Engine

Model Yanmar 3TNV70
Horsepower 14 hp @ 2,300 rpm
Fuel Tank Capacity 5.3 gallons

Features

Travel Speed L/H 1.3 / 2.5 mph
Ground Pressure 3.7 psi
Swing Speed 9.5 rpm
Swing Angle L55 / R80

The system enables easy and fast installation between roof and floor via its telescopic stanchion, and since there is no need for anchoring, damage can be avoided to the surrounding working area. The pivot column can be angled from 180 and 360 degrees, enabling the operator optimal drilling flexibility with a single set up, making it perfect for small stitch drilling jobs and the like.

  • Floor covering scraper weighs 130 lbs.
  • Removes glue-down carpet, hardwood flooring, linoleum, non-slip floor coverings, vinyl tile and other adhesive, cement or mastic
  • .75-hp fan-cooled capacitor-start motor
  • 37 ft. of FGI-protected extension cord
  • Scre-type height control
  • Foldable handle

  • 3/4 inch capacity, 12.5 amp motor, 350 RPM
  • Solid state electronic switching
  • Feedback speed control
  • Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

  • GPM: .70

  • Max Tip: .023

  • P.S.I.: 3000

  • H.P.: 1.0

    Tips additional

  • Cleans 1 1/2" to 6" drains
  • Our most popular and versatile mid-sized plumbing pipe cleaning equipment / sewer jetter.
  •  
  • Reel holds 300' x 3/8" jetter hose
  • Pressure washer additional  

Horizontal circle is graduated in degrees and reads to 5'. Precise movement control is augmented by Hz and tangent screws. Large leveling screws make set-up easy and precise. Built-in sunshade and top-mounted vial provide ease of use in the field. Comes complete with instrument, tripod, rod and carrying case. Hz circle graduated to single degree; Hz circle reads to 5 min. of a degree. Ideal for leveling foundations, driveways, patios, floors, sills and other light-duty jobs. 20X magnification, up to 200' working range, 4' minimum focus, accurate to 1/4" at 75'.