{category.name}

Product Catalog

  • Adjustable depth guide quickly sets nails to the desired depths
  • Exhaust port can be adjusted for your convenience
  • Lightweight for maneuverability
  • Magnesium design provides durability
  • For use in indoor and outdoor finish and trim jobs
  • Drives 1-1/4 - 2-1/2 in. 15-gauge angled finish nails
  • Oil-free operation requires minimal maintenance and eliminates the risk of oil stains from the product

Remove slag, rust, paint and dirt quickly with this needle scaler

 

Needles additional

This 1" pneumatic impact wrench, built with industrial-duty components, helps you power through major projects! Made with lightweight, durable cast aluminum housing, the air impact wrench has a convenient reverse valve for easy direction changes--three speeds forward and three speeds reverse. Featuring an 8" extended anvil and a torque range of 250-1250 ft. lbs., this tough pneumatic impact wrench works best with a 1/2" hose.
  • Lightweight, durable cast aluminum housing
  • Convenient reverse valve for easy direction changes

We have a variety of compressors that will run 1 or 2 jack hammers. Compressors are tow behind, hammers come in either 20lb, 40lb, 60lb or 90lb weights. 1 hose and 1 bit included in rental per gun.

  • Constant run control set at 105-125 PSI
  • High quality pilot valve
  • Pneumatic throttle idle control
  • Honda GX Series OHV Engine

  • Constant run control set at 105-125 PSI
  • High quality pilot valve
  • Industrial/Commercial grade UL Listed electric motor
  • Thermal overload motor protection
  • 6 ft power cord

  

  • Oil lubricated pump with cast iron cylinders provides over 1500 running life hours
  • 4.0 SCFM delivered @ 90 PSI pump, 4.0 gallon tank and 125 max PSI enables more nails to be fired and provides quicker recovery
  • Dual soft start valves assist in cold weather start up
  • Site glass for easy check of oil level 4 gallon twin stack tank design with proven acceptance in the market
  • Ball drain valve for quick and thorough tank draining
  • Universal push-to-connect coupler for ease of operation
  • Utilizes EMGLO®'s 50 years of expertise in air compressors

 

  • Manufacturer: Abbott Rubber
  • Model Number: 1025-0750R-50-CRS

A quality hose for use with mobile air compressors to 150# working pressure.

  • Manufacturer: American Pneumatic Tool
  • Model Number: 17399

APT's Model 1133 Rivet Buster is a jumbo Rivet Buster with an 11" stroke. This tool complements the "classic" 133 Rivet Buster in those applications where heavy demolition force is required. This model is widely known as a tough, powerful tool, with the ability to perform heavy demolition work. Rivet Busters are also popular for cutting up underground tanks

  • Manufacturer: American Pneumatic Tool
  • Model Number: 5239

APT's Model 190, (90 lb. class), Paving Breaker is tough and dependable; the high performance Model 190 is the most powerful air tool APT makes. It is designed for big jobs such as heavy demolition and concrete breaking. Since the Model 190 has the ability to penetrate the hardest concrete it is the tool of choice for road building and foundation removal

  • Manufacturer: American Pneumatic Tool
  • Model Number: 5235

APT's Model 160, (60 lb. class), Paving Breaker, is a hard-hitting tool that can be used for medium to heavy demolition work and concrete breaking. The 160 is the perfect all-around breaker and one of the best tools on the market for asphalt cutting applications

  • Manufacturer: American Pneumatic Tool
  • Model Number: 17923

APT's Model 140, (40 lb. class), is a rugged, yet lightweight Paving Breaker designed for light to medium construction work. It is ideally suited for plant maintenance work, such as light demolition of floors, pavement, frozen ground and masonry walls. This tool is also very popular for bridge deck jobs