The TwinTec 1840 battery floorcare machine has been engineered to substantially reduce size whilst, at the same time, maximise the performance and handling. With the total freedom of 24V battery, cable free, operation, this machine will get into areas and places that other machines simply will not go.

13" cleaning width
4gal solution tank
65 psi pump
1500 rpm brush
Self contained
Multiple position folding handle
25 foot leaf cord

Unit features single right hand side broom for use on edges.

Has a large hopper to capture all dirt, and sand.

Siding Shingle cutter

• Adjustable depth guide quickly sets nails to the desired depths
• Exhaust port can be adjusted for your convenience
• Lightweight for maneuverability
• Magnesium design provides durability
• For use in indoor and outdoor finish and trim jobs
• Drives 1-1/4 - 2-1/2 in. 15-gauge angled finish nails
• Oil-free operation requires minimal maintenance and eliminates the risk of oil stains from the product

• Face nailer eliminates hand-nailing the first 2 and last 6 strips
• Exclusive pawl and ratchet assembly ensures that the ram doesn't return until the nail is properly seated

• Convertible tool-free adjustable foot adapts to 1/4-inch to 7/16-inch engineered flooring. Factory set to 5/16-inch flooring
• Lightweight magnesium design for added durability
• Oil-free operation requires no regular maintenance and eliminates the risk of oil stains
• Ultra-quiet rear exhaust directs air away from the user
• Perfect for speed and accuracy

The 3200 series scaffold planks offer a 750 pound duty rating and allow for 3 people on one plank. The TWIST-PROOF stage design is ideal for ladder jack applications, swing stages or catwalks. Slip-resistant decking minimizes paint or material build up. The stage has vinyl coated end caps. Each stage is 28" wide

The Porter-Cable 7403 Power Paint Remover is designed for fast, uniform and controlled removal of paint from wood, composition and many other surfaces. This tool is manufactured with 100% ball bearings for durability. An adjustable side handle mounts right or left for user preference.

• 8 Amp motor, AC only
• Variable-speed dial 3,300-4,500 rpm
• Vertical and horizontal adjustments for uniform removal
• Uses tungsten carbide discs of 24, 36, 46 grit
• 100% ball bearings
• Adjustable side handle mounts right or left
• Discs additional

This oil transfer pump has been designed to transfer large quantities of oil at medium pressure between tanks. This  pump also guarantees good flow rates at high pressure, in applications in which the oil pump must supply hose reels for fixed oil distribution systems. Common features of all   oil transfer pumps include quiet operation (less than 70dB), smooth flow characterised by the absence of pulsations, closed-delivery operation thanks to the incorporated adjustable bypass, high suction capacity and compact design.

Specifications

Its ergonomic spray gun allows the operator to work longer and with greater ease. It's quick connect steel accepts standard nozzles and attachments. 4 Stainless Steel Quick Connect Nozzles: 0°, 15°, 40° & soap applicator nozzles allow you to choose the spray pattern best suited for the job. Extra dirty? Just drop the detergent siphoning tube into pressure washer safe detergent and attach the soap applicator!

The WaterBlaster outperforms everything in its class. When power, performance and reliability are needed, the WaterBlaster is the indisputable winner among professional cleaning contractors.The WaterBlaster dual belt drive system provides redundant power transfer from the engine to the pump for years of reliable use.

Specifications

Water Pressure: 3200 PSI
Flow Rate: 3.0 GPM

The Water Shotgun has set the standards that all other cold-water pressure washers are measured against. The Water Shotgun features innovative technology to stabilizer the platform during operation, extend the life of the machine, and provide the most durable base of any cold-water pressure washer on the market. Demand the best - demand a Simpson Water Shotgun.

Water Pressure 4000 PSI

Flow Rate   5.0 GPM

10ton porta power jack/hydraulic body repair kit /Portable Hydraulic Jack 

10MT Portable Hydraulic Jack/porta power  jack/hydraulic body repair kit

Specifications: 
Capacity: 10MT 
Min. Height: 355mm, 14" 
Max. Height: 492mm, 193/8" 
Lifting Height: 137mm, 53/8" 

Jack Stands, Lifting Capacity (Tons) 4 Per Stand, Lifting Height Min. (In.) 12 In., Lifting Height Max. (In.) 18 In., Base Size (In.) 8/34 In. x 7-1/2 In., Welded Steel, ANSI

Rented individually

Heavy duty steel construction with welded safety heel restraint. Fork extensions affect truck capacity. Refer to your lift truck manufacturer for a derated capacity. Durable powder coat Safety Yellow finish. 2" maximum fork thickness. 

Forklift additional

Measuring Wheels & Length Counters | Type: Measuring Wheel | Counter Limit (Feet): 100,000.00 | Overall Length (Inch): 36 | Overall Length (Feet): 3.00 | Accuracy per 100' (Decimal Inch): 1.0000 | Counter Unit of Measure: Feet

6 cubic ft.    
37 1/2" long x 25 1/2" high x 23 1/2" wide

8" Mold-On Rubber Wheels
 2 - Swivel & 2 - Rigid

Needs a truck, SUV, or trailer capable of hauling something that is 12' long

Equipment Specifications - Unit is 12' long

Remove slag, rust, paint and dirt quickly with this needle scaler

Needles additional

A coated spindle housing make this heavy-duty Milwaukee Straight Grinder comfortable to hold working. Equipped with a hinged face plate with wing nut fasteners for easy wheel changes, this tool can accept up to 6in. resinoid bond wheels. Wire brushes can also be attached for cleaning rust from work surfaces, as well as buffing wheels for polishing.

Concrete Surfacing Grinder makes fast, safe work of refurbishing and de-burring exposed concrete. Also ideal for removing irregularities, formwork seams, and protrusions, the 1773AK features a dependable, 10-Amp motor, diamond cup wheels, and a dust management feature.