Product Catalog

Don't just cover up odors destroy the molecules that cause them with the Powr-Zone Ozone Generator. Powr-Zone actually eliminates odors and leaves pure, fresh oxygen in its place.

Features:
• Produces 1.5 grams/hr. at 7 p.p.m.
• Effective for areas up to 60,000 cubic feet
• 12 hour timer with power supply overload protection
• Gas filled arc module electrodes
• Maintenance free - no plates or UV tubes to corrode or clean

Portable Room Air Conditioner

The Original Portable Cooling Units

The Classic 10 is MovinCool's original portable room air conditioner. Its rugged design features a standard 115 V source, which can handle temperatures up to 105 degrees Fahrenheit. Among portable AC units, the Classic 10 has continued to hold its own in the industry.

Since the Classic 10 spot cooler is self-contained, portable and has no special power requirements, it can be rolled into any room to instantly cool the hottest spot. The Classic 10 redefines portable cooling by efficiently cooling only the area that needs it. This saves you money while protecting people and equipment and speeding up processes.   

** Exhaust duct required in most cases.

Radiant propane heater for outdoor use only. Warms up a chilly area. Great for deck or poolside. Customer supplies propane.

240V, 13amps. 3,000 watts

Good for a medium size room or office.

19.5"l x 11.8"w x 17.3"h.

1500 watts, 120V 15amps. Thermostat controlled. 

13"l x 7.5"w x 11"h.  Great for small room or office.

Heater sits outside and heat is ducted into structure. Runs on kerosine or diesel. Thermostat controlled.

Indirect fired heater sits outside and heat is ducted into structure. Thermostat controlled. Fuel source is seperate from heater. 

120,000 BTU kerosine or diesel heater. Heater sits outside and heat is ducted into structure. Thermostat controled. Fuel source is seperate from heater. 

65,000 BTU electric heater. 18,000 watts 240V 3PH 50amps.

590 cfm to move heat around space. 62lbs 30"l x 14'w x 20"h.

Good clean heat.

18,000 watts, 75 amps at 220V 1PH. 590 CFM to move heatthroughout the space. 62 lbs 30"l x 14"w x 20"h.

Good clean heat.

 

 

55,000 BTU heater, runs on kerosine or diesel. 5 gallon capacity,.75 per hour 6 hour run time. Built in thermostat. Must be vented when in use.

110,000 BTU heater runs on kerosine or diesel. 9 gallon fuel capacity. .8 gallons per hour, 11 hour run time. Built in thermostat. Must be vented when in use.

150,000 BTU heater, runs on kerosene or diesel. 13 gallon capacity. 1 gallon per hour use, 13 hour run time. Built in thermostat. Must be vented when in use.

350,000 BTU heater, runs on kerosine or diesel. 30 gallon capacity, 3 gallons per hour use. 10 hour run time. Must be vented during use.

  • Model Number:

600,000 BTU heater, runs on kerosene or diesel. Built in thermostat. 36 Gallon fuel capacity. Approximately 8 hour run time. Must be vented when in use.

  • Manufacturer: Porter-Cable

Variable-speed dial settings from 1,400-2,000 RPM. Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection. Motor located on opposite end of handle from sanding head, providing balance and control. Built-in dust collection hose.

  • Manufacturer: Bon Tool
  • Model Number: 24-202-B10

Features a 14-1/2" wide aluminum pin plate with 59 adjustable nickel plated pins. Non-marring tail block. Includes 4 tubing sections for operating length from 34-1/2" to 22 feet. Additional tubing can be added for longer stretches. Sturdy carrying case included.

  • Manufacturer: Wacker Neuson
  • Model Number: BS60-2I

Patented oil-injected system provides reliable performance by eliminating spark plug fouling and carbon buildup. The no-mix system is an added convenience for operators. Plus an amazing fuel to oil ratio of 120:1 allows for longer and cleaner run times... up to 65 hours on a single tank of oil. A low oil shutdown switch prevents running the rammer without oil, for trouble free operation. Exclusive air filter compensation system allows for longer run time between filter changes

  • Manufacturer: Lenox Tools
  • SKU: 125014
  • Model Number: 0240-20

8A Powerful Motor, 3/8" Drill, 0-2,800 RPM Variable Speed Trigger For Fast Drilling In Wood & Metal, Durable All Metal Gear Case Provides Superior Gear Support In High Torque Applications, Soft Grip Handle & 2 Finger Trigger For Added Comfort.

  • SKU: 403975
  • Model Number: AE2240

40', Aluminum, Type IA, Extension Ladder, 300 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Rope & Pulley, Modified I-Beam Construction.

  • Manufacturer: Bostitch
  • Model Number: 407619

Pneumatic, Hardwood Flooring Stapler. Use to install 3/4" solid hardwood flooring, Uses Bostitch #BCS1512, True Value #406231, #BCS1514, True Value #406256, & #BCS1516, True Value #406280 Staples.

  • Manufacturer: Bosch Power Tools
  • Model Number: BH2760VC

15 Amp, 120V Demolition Hammer