10ton porta power jack/hydraulic body repair kit /Portable Hydraulic Jack 

10MT Portable Hydraulic Jack/porta power  jack/hydraulic body repair kit

Specifications: 
Capacity: 10MT 
Min. Height: 355mm, 14" 
Max. Height: 492mm, 193/8" 
Lifting Height: 137mm, 53/8" 

Jack Stands, Lifting Capacity (Tons) 4 Per Stand, Lifting Height Min. (In.) 12 In., Lifting Height Max. (In.) 18 In., Base Size (In.) 8/34 In. x 7-1/2 In., Welded Steel, ANSI

Rented individually

Used for fast, easy alignment of clutch plates. Bushing range- import- 12 to 12.7 mm., 15.8 to 16 mm., 17.4 to 18 mm., 21 to 22.2 mm. Domestic- 0.561 in. to 0.590 in., 0.749 in. to 0.787 in. 0.812 in. to 0.874 in., 0.984 to 1.181 in. for use on most domestic and import cars.

Ratchet-style torque wrench has with engraved scale and a torque range of 10 - 150 ft.-lbs. in 1-lb. graduations.

Type: Steering Wheel Puller Set | For Use With: Steering Wheels that accept tapped cap screws

Slide Hammer

The Pitman arm puller fits most cars and light trucks. Constructed of drop-forged steel for strength and durability.

Various sizes

• Adjustable to fit most Macpherson Strut sizes. Maximum height of removable spring: 9-1/2. Set of two compressors maintain spring curvature. Easy to install without special tools.

Safely and easily compresses coil springs accessible from the center of the coil. 12in. rod has tempered chrome molybdenum steel jaws. Jaw opening range is 8 1/4in.–14in.

Pulls drum with studs in drum ONLY!

Ball Joint Service Kit, Material Carbon Steel, Removes And Installs U joints And Press-Fit Ball Joints, For Use With Ratchet Or Breaker Bar, Includes G1319857 (C-Frame Press), 3 In O.D. x 2 3/4 In I.D. Receiver Tube, 2 1/2 In O.D. x 2 1/4 In I.D. Receiver Tube, 2 In O.D. x 1 3/4 In I.D. Receiver Tube, Installing Adapter and Removing Adapter

• Used to remove shock linkage, tie rods, and ball joints. Also for general service on many cars and light trucks.
• Size: 16" long, 15/16" Fork Spread

Rear Axle Puller, Slide Hammer, Length 23 In., Rear Axle Puller Fits Most Late Model Passenger Cars and Light Trucks for Removal of Flange Type Rear Axles, Puller Will Service Axles with Bolts and Studs Up to 9/16 In. Diameter, For Use With 4, 5, or 6 Bolts, Patterns and Stud Circles from 4-1/4 to 5-9/16 In. Dia., Material Carbon Steel, Number of Pieces 4, Includes Rear Axle Pulling Plate with 5-lb. Slide Hammer Assembly

• Lightweight, durable cast aluminum housing
• Convenient reverse valve for easy direction changes

JET JCH Linesman Pullers are heavy duty cable pullers designed to lift, lower, stretch or pull heavy loads. Drop forged hooks with safety latches standard. Complied with ANSI/ASME B30.21 standard

JET JCP Series Cable Pullers are general purpose cable pullers designed to lift, lower, stretch or pull heavy loads. 1 ton to 4 ton capacities available. Lightweight zinc plated steel construction to resist corrosion. Double solid cast aluminum ratchet wheel brake system hold load securely in any position. Concealed spring lever control prevents accidental release. Drop forged hooks with safety latches standard. Aircraft quality 3/16" cable. Snatch block included with JCP-2 and JCP-4 models. Complies with ANSI/ASME B30.21 standards

JET L-100 Series Manual Chain hoist combine a true rugged industrial design with highly refined quality. The drop forged, carbon steel hooks are quenched and tempered to increase strength and will slowly stretch to indicate an overload situation. Cast steel safety latches, attached with Allen head screws and lock nuts, outclass the industry standard of stamped safety latches. The induction hardened, 100 grade load chain provides 20% more strength then the common 80 grade load chain found on inferior hoists. The double enclosed brake cover keeps dirt and debris away from the brake mechanism. While the sealed ball bearing supported load sheave provides efficient and smooth operation. All the internal pats are Zinc coated for additional corrosion protection. The triple spur gear drive train features alloy steel gears that have been heated treated, quenched and then case hardened for life time of service. The patented fused brake disc design means little to no maintenance is required to

JET L-100 Series Manual Chain hoist combine a true rugged industrial design with highly refined quality. The drop forged, carbon steel hooks are quenched and tempered to increase strength and will slowly stretch to indicate an overload situation. Cast steel safety latches, attached with Allen head screws and lock nuts, outclass the industry standard of stamped safety latches. The induction hardened, 100 grade load chain provides 20% more strength then the common 80 grade load chain found on inferior hoists. The double enclosed brake cover keeps dirt and debris away from the brake mechanism. While the sealed ball bearing supported load sheave provides efficient and smooth operation. All the internal pats are Zinc coated for additional corrosion protection. The triple spur gear drive train features alloy steel gears that have been heated treated, quenched and then case hardened for life time of service. The patented fused brake disc design means little to no maintenance is required to

JET L-100 Series Manual Chain hoist combine a true rugged industrial design with highly refined quality. The drop forged, carbon steel hooks are quenched and tempered to increase strength and will slowly stretch to indicate an overload situation. Cast steel safety latches, attached with Allen head screws and lock nuts, outclass the industry standard of stamped safety latches. The induction hardened, 100 grade load chain provides 20% more strength then the common 80 grade load chain found on inferior hoists. The double enclosed brake cover keeps dirt and debris away from the brake mechanism. While the sealed ball bearing supported load sheave provides efficient and smooth operation. All the internal pats are Zinc coated for additional corrosion protection. The triple spur gear drive train features alloy steel gears that have been heated treated, quenched and then case hardened for life time of service. The patented fused brake disc design means little to no maintenance is required to

JET L-100 Series Manual Chain hoist combine a true rugged industrial design with highly refined quality. The drop forged, carbon steel hooks are quenched and tempered to increase strength and will slowly stretch to indicate an overload situation. Cast steel safety latches, attached with Allen head screws and lock nuts, outclass the industry standard of stamped safety latches. The induction hardened, 100 grade load chain provides 20% more strength then the common 80 grade load chain found on inferior hoists. The double enclosed brake cover keeps dirt and debris away from the brake mechanism. While the sealed ball bearing supported load sheave provides efficient and smooth operation. All the internal pats are Zinc coated for additional corrosion protection. The triple spur gear drive train features alloy steel gears that have been heated treated, quenched and then case hardened for life time of service. The patented fused brake disc design means little to no maintenance is required to

JET Ratchet Type LOAD BINDER for 5/16-3/8" Chain -- Drop-forged, heat-treated alloy steel construction. Take up slack and secure chain around cargo in one operation. Easy-to-use with lever or ratchet type handle and 360° swivel hooks. Durable rust resistant powder coat finish. Complies with US DOT regulations. Do not exceed working load limit. Do not use for overhead lifting. Do not use if any components are damaged or worn. See True Value # 724684

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards. See True Value # 724664