17" 1.5 hp Floor Machine

For the tightest floor possible choose the 2” x 16 Ga Porta-Nail by PNI. Porta-Nails are designed specifically for nailing tongue and groove wood floors using the Porta-Nailer and or Portamatic flooring installation tools This fastener has been the standard for close to 50 years and is recommended for use when installing 1/ 2 “ to 1” Solid wood flooring on a subfloor that is built with joists. The patent Porta-Nail offers the following features: Wide head wedge shaped design with well defined barbs which prevent the nail from backing out. A cupped point which enables the nail to cut through the wood thus minimizing the potential for splitting. These design features provide for the greatest impact and holding power to ensure that your floor lasts a lifetime. One pack of 1000 Porta-Nails will nail approximately 200 square feet of tongue and groove flooring. For use in Porta Nailer Models 401, 402, 501,410, 421 and 470. Caution: Do not use in any tool requiring an

The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with

12" x 18" Orbital Polisher/refinisher allows the DIYer to do the jobs of a rotary polisher with ease!

7" Floor edger runs at 3600 RPM is powerful enough for the toughest job and finishes beautifully

The SL8 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results!

45º Miter Guide

Straight Cut Guide

10" Electric 1HP 115v Tile Saw

4" Steel chisel

Air Powered 5' ergonomic chisel scaler, require 6-8 CFM @ 90 PSI

Replacement CPM8 drum w/ 78 carbide and 204 spacers

Replacement carbide cutter for CPM4, CPM8 and CPM10 8 shaft drum

8" Electric 230/460 volt, single phase, scarifier machine

8" Gas 9HP Honda scarifier machine

Hour Meter, Inductive

WIRE BRUSH w/ WEDGE

CG222 Scarifier Assembly

C80 Stone, FINE

C24 Stone, MEDIUM

C10S Stone,SUPER COARSE

C10 Stone, COARSE

PRO TUNGSERT- pack of 6

STRIP-SERT,